Specifications
316 Stainless Steel and Non-Corrosive Material Construction
- provides longer equipment life;
- minimizes maintenance;
- has resistance to damage from most chemicals.
Stainless Steel Sintered Screen
- tolerates temperatures up to 180¡F;
- is available for filtration to 15 microns;
- ensures mesh size stability because of the sintering process;
- features positive go/no go construction, minimizing screen breakage;
- avoids danger of mixing contaminant into filtration media and discharging back into the system as can happen with sand media filters.
Reverse-flow Reciprocating Flush Nozzles
- provide an effective method of cleaning a filter screen;
- allow the use of a smaller flush valve, thereby providing less pressure drop and greater differential pressure across the screen and through the nozzle for a more-efficient cleaning system;
- utilize a reversing screw that causes the nozzles to traverse back and forth across the screen ensuring 100% cleaning of the screen;
- remove suspended solids and organic materials including algae;
- use a minimal amount of water per cleaning cycle;
- use less than 10% of the filter flow capacity during the brief cleaning cycle;
- allow the system to operate uninterrupted during the cleaning cycle.
Fully Automatic Cleaning
- with hydraulic, electronic or battery-operated controller;
- saves labor, time and scheduling problems;
- can be set for low pressure differential.
U.S. and Foreign Patents Pending
| Specifications | |||||
| Model/Part Number | 125/5002 |
250-R/5003 |
500-R/5004 |
1000-R/5006 |
1500-R/5008 |
| Maximum Flow Rate* GPM | 132 |
250 |
500 |
975 |
1450 |
| Minimum Working Pressure PSI | 35 |
35 |
35 |
35 |
35 |
| Maximum Working Pressure PSI | 125 |
125 |
125 |
150 |
150 |
| Screen Area IN squared | 118 |
224 |
448 |
867 |
1300 |
| US PM per IN squared of Screen, Max Flow | **1.12 |
**1.12 |
**1.12 |
**1.12 |
**1.12 |
| Maximum Temperature, F° | 180 |
180 |
180 |
180 |
180 |
| Filter Housing Diameter | 10" |
10" |
10" |
15" |
15" |
Inlet/Outlet
Diameter |
2" |
3" |
4" |
6" |
8" |
Inlet/Outlet
Diameter |
2"
or 4" |
3"
or 6" |
4"
or 8" |
8"
or 10" |
|
Weight, lbs. |
30 |
2"
- 51 3" - 55 4" - 60 |
3"
- 74 4" - 80 6" - 92 |
4"
- 382 6" - 395 8" - 410 |
6"
- 420 8" - 435 10" - 450 |
| *Maximum
flow rate can vary depending on dirt load and screen micron size. **When comparing manufacturers' flow rates, divide flow rate by screen square inches. Then, compare each manufacturer's gallons per square inch of screen to evaluate equivalent capacities. |
|||||
| Filter Materials | |||||
| Model/Part Number | 125/5002 |
250-R/5003 |
500-R/5004 |
1000-R/5006 |
1500-R/5008 |
Tank, Complete |
STAINLESS
STEEL |
||||
Screens |
3-LAYER
SINTERED STAINLESS STEEL |
||||
Flush Mechanism |
STAINLESS
STEEL AND ENGINEERING GRADE POLYMER |
||||
Flush Valve |
30%
GLASS FILLED NYLON |
||||
Seals |
NITRILE,
VITON, SILICONE |
||||
| Automation | |||||
| Model/Part Number | 125/5002 |
250-R/5003 |
500-R/5004 |
1000-R/5006 |
1500-R/5008 |
All Models |
HYDRAULIC,
BATTERY-OPERATED OR ELECTRIC CONTROLLERS AVAILABLE |
||||
| Flushing Data (at 35 psi) | |||||
| Model/Part Number | 125/5002 |
250-R/5003 |
500-R/5004 |
1000-R/5006 |
1500-R/5008 |
| Exhaust, Valves, Inches | 1 |
1 |
1 |
1-1/2 |
1-1/2 |
| Flush Cycle Time, Seconds | 20 |
20 |
20 |
20 |
20 |
| Flush Water Per Cycle, Gallons | 4 |
6 |
9 |
12 |
15 |
| Min. Flow For Flush, GPM | 16 |
20 |
28 |
35 |
45 |
| Screen Sizes | |||||||||
| Micron | 500 |
300 |
200* |
130* | 100* |
80* |
50 |
25 |
10 |
| mm | 0.5 |
0.03 |
0.02* |
0.13* | 0.1* |
0.08* |
0.05 |
0.02 |
0.01 |
| Mesh | 30 |
50 |
75* |
120* | 155* |
200* |
300 |
450 |
600 |
*Standard
Sizes |
|||||||||